Updated Comprehensive Guide to Making 25mg THC Gummies with the Levo 2
(Using 14g of THCA Crumble, a Double Infusion Process, and Two Separate Pods with 3.5g Each)
This guide will take you step-by-step through making 64 gummies at ~24-25mg THC each, using 14 grams of THCA crumble, two Levo pods (each holding 3.5g per run), and a double infusion process to maximize potency.
Step 1: Decarbing the First Batch of Crumble in the Levo 2
Why Decarb?
THCA must be converted to THC through decarboxylation (heat activation) for full potency.
Decarb Setup (First 7g Batch)
Divide 14g of crumble into two Levo pods, each containing 3.5g of crumble.
Place both pods into the Levo 2 (totaling 7g for the first round).
Set "ACTIVATE" mode to 240°F (116°C) for 30-40 minutes.
The crumble will melt into a liquid state—do not remove it after activation.
🔹 Tip: Bubbling is normal—this is moisture and terpenes evaporating. The melted crumble will remain in the pods for infusion.
Step 2: First Infusion (7g Crumble in 2 Cups of MCT Oil)
With the first batch of decarbed crumble still in the pods, add 2 cups of MCT oil to the Levo reservoir.
Set INFUSE mode to 160-175°F (71-80°C) for 2 hours.
Once done, remove the infused oil and set it aside—DO NOT STRAIN YET.
Leave the first batch of melted crumble residue in the pods.
🔹 Why Remove the Oil? This ensures that the second decarb process happens in fresh conditions while preserving the first round of cannabinoids.
Step 3: Second Decarb & Infusion (Using the Second Batch of Crumble)
Remove the first batch of pods and insert the second set (another 7g, 3.5g per pod).
Decarb again at 240°F (116°C) for 30-40 minutes until fully activated.
Once the second batch is fully decarbed, pour the infused oil from the first batch back into the Levo.
Infuse for 3 hours at 160-175°F (71-80°C) to extract the second round of cannabinoids.
Once done, strain the oil using a 120μm rosin bag or fine mesh.
🔹 Why This Works?
Using two separate decarb and infusion cycles allows for maximum extraction without oversaturating the oil.
The double infusion method ensures peak potency while maintaining a smooth consistency.
Straining only after the final infusion ensures minimal oil loss.
Step 4: Preparing the Gummy Mixture
Since you're using Levo’s pre-mixed gummy kit, follow these steps:
Heat the gummy mix according to package instructions.
Add 4 tablespoons (~¼ cup) of infused MCT oil and stir well.
Mix in lecithin (½ to 1 teaspoon) to help emulsify the oil evenly.
Stir thoroughly until fully incorporated.
🔹 Why Lecithin?
Improves bioavailability, making the gummies stronger.
Prevents oil separation, ensuring consistent potency in each gummy.
Step 5: Pouring & Setting the Gummies
Pour the mixture into 64 gummy molds (3mL each).
Refrigerate for at least 12-24 hours for full firmness.
If you want chewier gummies, let them air dry for 24-48 hours at room temp.
🔹 Pro Tip: If you want extra thick gummies, add ½ to 1 extra tablespoon of unflavored gelatin before pouring into molds.
Step 6: Calculating Final Potency
We used 14 grams of THCA crumble (99% THCA). After decarb, the THC yield is:
THCA converts to THC at ~87% efficiency
Each tablespoon of infused MCT oil contains ~377mg THC
4 tablespoons used in the batch → Total: ~1,507mg THC
THC per gummy = 1,507mg ÷ 64 gummies = ~23.6mg per gummy
🔹 Result: Each gummy contains ~24-25mg THC.
Step 7: Storing & Dosing
Refrigeration: Store in an airtight container in the fridge for up to 2 months.
Room Temperature: Gummies last 1-2 weeks if kept in a cool, dark place.
Freezing: Extend shelf life to 6+ months by freezing.
🔹 Dosing Tip: If 25mg is too strong, cut gummies into halves or quarters for smaller doses.
Final Notes & Adjustments
If you want a smoother taste, strain the oil using a coffee filter or fine mesh.
If you don’t strain, expect a stronger, full-spectrum effect with a bit of sediment.
Using two separate pods and two rounds of decarb + infusion ensures optimal potency and efficiency.